As an Amazon Associate, we earn from qualifying purchases. This post contains affiliate links – if you buy through them, we may earn a commission at no extra cost to you.
There’s a best one for your mattress depth, your reason for buying, and how you want the surface to feel. Memory foam adds its own demands: heat builds up in the foam, so a protector that traps air makes a warm bed warmer, and a protector that shifts changes the slow, even sink you paid for.
| # | Product | ||
|---|---|---|---|
| 1 |  | Utopia Bedding Zippered Encasement Top Pick | Check Price |
| 2 |  | PlushDeluxe Bamboo Protector Best for Hot Sleepers | Check Price |
| 3 |  | BEDLORE Waterproof Protector Best for Light Sleepers | Check Price |
| 4 |  | Tempur-Pedic TEMPUR-Protect Best for Tempur-Pedic Beds | Check Price |
| 5 |  | SureGuard Mattress Encasement Best for Bed Bugs | Check Price |
| 6 |  | Serta Power Chill Protector Best for Cooling | Check Price |
| 7 |  | AllerEase Maximum Protector Best for Allergies | Check Price |
| 8 |  | Lucid Zippered Encasement Best for Thick Mattresses | Check Price |
| 9 |  | Linenspa Waterproof Protector Best for Easy Setup | Check Price |
| 10 |  | Bedsure Quilted Protector | Check Price |
1. Utopia Bedding Waterproof Mattress Protector Queen Size
Best for: someone who wants the whole mattress sealed, not just the top.
A zippered encasement asks one thing of you at the start: the mattress has to come off the bed and slide inside. In return, you get protection on all six sides, which matters on memory foam because foam is porous and a spill that reaches the side seam soaks inward. This one fits queen mattresses up to 15 inches deep and wraps 360 degrees, with a stretchy knit fabric the listing says slips on easily and stays put.
The closure is a wrap-around zipper, so the mattress sits inside a sealed shell rather than under a fitted skirt. The backing is TPU on all sides, which is the layer that blocks liquid from reaching foam. The fabric is knitted polyester, and the listing describes it as non-crinkling, so it shouldn’t rustle under a sheet. Care is simple: machine wash and tumble dry low with your regular laundry.
Good if:
- You want protection on the sides and bottom of the mattress, not just the sleeping surface
- You’re dealing with spills, pets, or bed bugs and want the mattress fully enclosed
- You don’t mind lifting the mattress once to install it
Skip it if:
- You want something you can pull off and wash without stripping the whole bed
- Your mattress is deeper than this protector can handle
2. PlushDeluxe Bamboo Waterproof Mattress Protector
Best for: a hot sleeper who wants a soft, silent top layer.
Memory foam holds heat, and a protector with a plastic feel makes that worse. This one is built from bamboo viscose with a breathable membrane the listing says wicks away moisture and regulates heat. That’s the feature that matters most on a foam bed — airflow through the cover, so the foam underneath doesn’t turn into a warm pocket.
It’s a fitted style, not a zippered one, and the listing says it fits any mattress depth up to 18 inches, including memory foam, latex, and spring. The waterproof layer is viscose-backed and the listing names spills, sweat, urine, and pet accidents as what it resists, which tells you it’s aimed at households with kids, pets, or someone needing incontinence protection. It’s also described as completely silent, with no crinkling sound.
Good if:
- You sleep hot and want a breathable bamboo surface over memory foam
- You need protection from sweat, urine, or pet accidents
- Your mattress is deeper than 15 inches
Skip it if:
- You want the sides and bottom of the mattress covered too
- You’d rather have a quilted, padded feel than a smooth knit
3. BEDLORE Waterproof Mattress Protector
Best for: a light sleeper who’s bothered by crinkling under the sheets.
Quilted protectors usually add a layer of filling, and filling is what makes some covers rustle when you roll over. This listing leans hard on the opposite: it calls the fabric noiseless and says it stays quiet even when you move. For a memory foam sleeper, that’s the whole game — foam is silent, so a noisy cover is the one thing that gives it away.
The design is quilted, with the filling locked in for even support, and the listing says it helps regulate temperature. The waterproof layer is TPU, described as fully blocking liquids. The skirt is a 360-degree elastic that fits mattresses up to 18 inches deep and is meant to stay slip-free through the night. Care is machine washable and tumble dry low.
Good if:
- You’re a light sleeper and noise under the sheets wakes you
- You want a quilted, padded surface rather than a thin knit
- Your mattress is up to 18 inches deep
Skip it if:
- You want six-sided coverage instead of a fitted skirt
- You prefer a smooth, flat cover with no quilting
4. Tempur-Pedic TEMPUR-Protect Waterproof Mattress Protector
Best for: someone who already owns a Tempur-Pedic and wants the matching cover.
The obvious reason to pick this one is the brand pairing. If your mattress is a Tempur-Pedic, a protector made by the same company is the safest bet on fit and feel, and this listing is written for exactly that. It’s a full-size cover, waterproof, and the stretchy fabric with mesh sides and deep pockets is designed to adapt to the mattress for a customized fit.
The interesting detail is the fabric: patented ThermalSense, described as lightweight and breathable with continuous airflow. On a memory foam bed, that’s the feature that keeps the foam from holding your body heat against you. Care is machine washable and dryer-safe, which is about as simple as upkeep gets.
Good if:
- You own a Tempur-Pedic mattress and want the cover made for it
- You want a breathable top layer over heat-retaining foam
- You want something you can wash and dry without special handling
Skip it if:
- Your mattress isn’t a Tempur-Pedic and you’d rather match your own brand
- You need six-sided encasement rather than a fitted cover
5. King (13-16 in. Deep) SureGuard Mattress Encasement
Best for: someone dealing with bed bugs or allergies who needs a sealed mattress.
Bed bugs don’t care about your sheets — they live in seams and crevices, which is why a fitted protector can’t stop them. This is a fully zippered encasement in king size, fitting mattresses 13 to 16 inches deep, with a super-fine zipper and SureSeal technology the listing says completely seals the mattress off. The listing also notes you’d use a SureGuard box spring encasement alongside it for full coverage.
The top is 100% cotton terry, which wicks moisture and is meant to retain the feel of your mattress. It’s described as soft and noiseless, and free from vinyl, PVC, phthalates, and fire retardants. The waterproof claim covers perspiration, bed wetting, liquids, and stains, and the listing backs it with a 10-year quality guarantee. It’s independently lab tested and GREENGUARD Gold certified, which is the sort of third-party testing worth knowing about if you’re sensitive to chemicals.
Good if:
- You’re dealing with bed bugs or dust mites and need the mattress fully sealed
- You want a cotton terry top rather than a synthetic knit
- You care about third-party certification for low chemical emissions
Skip it if:
- You want a cover you can strip and wash weekly without unzipping the whole mattress
- Your mattress is under 13 or over 16 inches deep
6. Serta Power Chill Cooling Waterproof Mattress Protector
Best for: a hot sleeper who wants the cover itself to feel cool.
Most protectors try not to trap heat. This one goes further and claims to actively cool, using Cool-Hex technology the listing says turns heat into cooling comfort. The surface is a cool-to-touch knit made from nylon and spandex. On memory foam, which already sleeps warm, that’s a meaningful difference in how the bed feels when you first lie down.
It’s a fitted design with extra-wide elastics on all sides, gripping traditional and foam mattresses up to 15 inches deep, and the listing says it prevents sliding. The waterproof barrier handles spills and moisture, and 3M Scotchgard is there to lift stains in the wash and inhibit odor. Care is specific: machine wash cold on gentle, like colors only, non-chlorine bleach if needed, tumble dry low, no iron, no dry clean.
Good if:
- You sleep hot and want a cover that feels cool to the touch
- You want a snug fit that won’t slide on a foam mattress
- You want stain and odor resistance built into the fabric
Skip it if:
- Your mattress is deeper than 15 inches
- You want a natural fiber like bamboo or cotton against your skin
7. AllerEase Maximum Protector
Best for: an allergy sufferer who wants a zippered cover with a lifetime warranty.
Allergy protection on a memory foam mattress is really about keeping dust mites and dander out of the foam, and that takes a zippered cover, not a fitted sheet. This one is a zippered protector with a soft, quiet top fabric backed by a waterproof layer. It’s designed for allergy sufferers specifically, and the sidewall construction fits queen and king mattresses up to 15 inches, with twin and full sizes going up to 12 inches.
The care instructions are unusually thorough, which is a good sign: machine wash hot with non-chlorine bleach when needed, tumble dry on the lowest setting separately, and remove when dry. The listing warns that dryer temperatures vary by brand, so use the lowest setting.
Good if:
- You have dust mite or dander allergies and need a zippered cover
- You want a lifetime warranty backing the product
- You want to wash hot, which matters for allergy care
Skip it if:
- Your mattress is deeper than this protector can handle in queen or king
- You’d rather have a fitted cover you can pull off in seconds
8. Lucid Zippered Waterproof Mattress Encasement
Best for: someone with a thick or unusually shallow mattress who needs a wide fit range.
Mattress depth is where most protectors fail, and this one covers 6 to 18 inches. That matters if you own a slim foam mattress or a deep hybrid, because a cover that’s too tight strains at the seams and one that’s too loose bunches under your back. The elasticized fit is meant to keep it snug and smooth across that whole range.
It’s a full zippered encasement with a waterproof StratoSmart barrier, and the listing says the watertight zipper and elastic seal every edge. The inner layer is polyurethane, which allows air to move, so the listing describes it as quiet and breathable with no crinkle. The outer is brushed polyester. The listing also notes it helps keep your mattress warranty valid. It’s machine washable and dryer safe, backed by a 15-year limited warranty.
Good if:
- Your mattress is very thick or very thin and you need a wide depth range
- You want zippered protection with a long warranty
- You want a quiet, breathable encasement for a foam bed
Skip it if:
- You want a quick fitted cover rather than a full encasement
- You’d rather have a cotton or bamboo surface against your skin
9. Linenspa Waterproof Mattress Protector
Best for: a first-time buyer who wants the simplest possible setup.
If you’ve never bought a protector before, the deciding factor is often how much work it adds. This one slides on like a fitted sheet and stays put, fitting any mattress up to 14 inches thick, with no bunching or slipping according to the listing. That’s the least fussy install on this list — no zipper, no lifting the mattress.
The waterproofing is an AquaTight barrier that blocks liquids, spills, sweat, and accidents. The surface is brushed polyester, described as soft and completely noiseless with no crinkle or rustle. The breathable fabric is meant to let air flow so you sleep cool and the mattress feel doesn’t change, which is the point on memory foam. It’s machine washable, dry on low heat, and backed by a 10-year limited warranty.
Good if:
- You want a protector that goes on in seconds like a fitted sheet
- You want a soft, noiseless surface over memory foam
- You want a straightforward warranty without a complicated install
Skip it if:
- Your mattress is deeper than 14 inches
- You need sides and bottom covered, not just the top
10. Bedsure Queen Mattress Protector
Best for: someone with an extra-deep mattress who wants a padded, quilted feel.
If you sleep on a tall foam or hybrid bed, that range is the difference between a cover that stays tucked and one that pops off at the corners. The elastic band along the edge is meant to hold it snug.
It’s a four-layer quilted design, built for softness and waterproofing at once, with a TPU layer underneath. The listing says it’s certified by Standard 100 by OEKO-TEX, which tests for harmful chemicals — a useful detail if the cover sits against your skin every night. The stitching is densely spaced to prevent seam slippage, and care is machine wash on gentle with cold water, tumble dry low.
Good if:
- Your mattress is extra deep and other covers won’t stay on
- You want a quilted, padded surface rather than a thin knit
- You want OEKO-TEX certification for chemical safety
Skip it if:
- You want a smooth, flat cover with no quilting
- You need a zippered encasement rather than a fitted skirt
Where These Overlap
Several of these are close enough that the choice barely matters. The PlushDeluxe Bamboo Protector and the Linenspa Waterproof Protector are both fitted, noiseless covers with breathable fabric meant to keep a foam mattress sleeping cool. The Linenspa fits up to 14 inches and the PlushDeluxe up to 18, so if your mattress is shallow, either works and you’d decide on the surface fabric — bamboo viscose versus brushed polyester.
The Utopia Bedding Zippered Encasement, the SureGuard Mattress Encasement, the Lucid Zippered Encasement, and the AllerEase Maximum Protector are a different animal. All four seal the mattress completely. If bed bugs or allergies are your reason for buying, the SureGuard and AllerEase stand out, since both are aimed at that buyer and both are zippered. Between the Utopia and the Lucid, the difference is depth range — the Lucid fits 6 to 18 inches, the Utopia up to 15.
Still Not Sure?
How often will I actually wash this?
Be honest about this one, because it decides between two designs. A fitted cover comes off in seconds and goes back on just as fast, so it gets washed on a normal schedule. A zippered encasement means stripping the bed and lifting the mattress, so it tends to get washed far less often. If you know you’ll wash monthly, the Linenspa Waterproof Protector is the practical pick. If you want protection that mostly stays put, the Utopia Bedding Zippered Encasement suits that habit better.
What do I already own that this has to work with?
Your mattress depth is the number that matters, and it’s easy to check with a tape measure at the corner. A cover that’s too tight strains at the seams; one that’s too loose bunches under your back. If it’s a standard depth, most of these will fit, and the choice comes down to surface feel.
What am I most likely to regret?
Two things come up most. The first is heat — a cover that traps air makes a memory foam mattress sleep warmer than it did before. The second is noise, because foam is silent and a crinkling cover is the one thing that spoils it. Both are hard to judge from a photo. If heat is your worry, the Serta Power Chill Protector is built around cooling. If noise is your worry, the BEDLORE Waterproof Protector is the one marketed as noiseless.
Frequently Asked Questions
Will a waterproof mattress protector make my memory foam mattress feel different?
It can, and the cover’s thickness is what decides it. A thin knit or terry cover sits close to the foam, so you keep the slow sink and contour you bought the mattress for. A quilted cover adds a padded layer between you and the foam, which softens the feel but changes it.
Do I need a zippered encasement or a fitted protector for a memory foam bed?
It depends on what you’re protecting against. A fitted protector covers the top and hangs over the sides, which handles spills, sweat, and accidents. A zippered encasement seals the whole mattress, which is what you need for bed bugs, dust mites, and dander, since those live in seams and crevices. The SureGuard Mattress Encasement and the AllerEase Maximum Protector are both zippered and both aimed at allergy and bed bug protection.
Will a waterproof cover make my memory foam mattress sleep hotter?
A waterproof layer blocks liquid, and by nature it can also block airflow, so the cover’s fabric matters. Bamboo viscose and breathable membranes are designed to let air move and wick moisture, which keeps the foam from trapping your body heat. The PlushDeluxe Bamboo Protector uses a breathable bamboo membrane, and the Serta Power Chill Protector uses a cool-to-touch knit with Cool-Hex technology. Both are aimed at the heat problem specifically.
Can I wash a waterproof mattress protector in hot water?
Check the care label, because it varies by product and getting it wrong can damage the waterproof layer. The AllerEase Maximum Protector allows machine wash hot with non-chlorine bleach when needed, and its listing warns to tumble dry on the lowest setting and remove when dry, since dryer temperatures vary by brand. The Serta Power Chill Protector takes the opposite approach: cold water on a gentle cycle, no iron, no dry clean.
Conclusion
If your mattress is standard depth and you want a soft, quiet cover that goes on like a fitted sheet, the PlushDeluxe Bamboo Protector is the one to start with. If you want the mattress fully sealed, the Utopia Bedding Zippered Encasement is the better fit. Measure your mattress depth at the corner first, then check the care label against how you actually do laundry. That’s the whole decision.